Independent buying guides for vinyl and turntables

LP vs EP vs Single: What the Vinyl Record Formats Mean and How to Play Each

Published How we research

You pick up a record labeled EP, another labeled LP and a small seven inch single, and the speeds and sizes do not seem to match up. The three terms are older than most of today's collectors, and they are used loosely, but each has a rough meaning that helps you decide what to buy and how to play it. This guide explains the formats, how size and speed relate to running time and what to set on your turntable.

Products from this article

The highest-scoring picks from the buying guides this article links to. Scores are our editorial assessment, not customer ratings.

As an Amazon Associate we earn from qualifying purchases. This does not change our picks. Affiliate disclosure
New to Prime? Try Prime free for fast, free shipping on eligible items.

What an LP is

LP stands for long playing. It usually refers to a 12 inch record that spins at 33 and a third RPM and holds a full album, typically split across two sides. The term came into use to separate these records from the shorter, faster discs that came before them.

Many albums are pressed on one LP, while longer releases come as a double LP in a gatefold jacket or two sleeves. If your turntable plays 33 RPM, it can play any standard LP, and the speed is normally printed on the label.

What an EP is

EP means extended play. It describes a release that is longer than a single but shorter than a full album. The format can vary, because an EP might be a seven inch record at 45 RPM or a 12 inch record at either 33 or 45 RPM, depending on the label and the era.

Because there is no strict rule, look at the label rather than assuming. An EP usually has several tracks on each side, and the number of minutes per side is shorter than on a full LP. That shorter side length gives the groove more room, which is often used to cut at a higher level.

What a single is

A single is traditionally a seven inch record with one song on each side, often called the A side and the B side. Seven inch singles commonly play at 45 RPM and have a larger center hole, so some of them need an adapter to sit properly on a standard spindle.

There are also 12 inch singles, which are often made for DJs and club play. They usually carry fewer tracks than an LP and may be cut at 45 RPM to give each track more space. They are sometimes called maxi singles, and they are a separate case from the small seven inch single.

Size, speed and why they matter

Size and speed are linked to how much sound fits on a side and how much detail the groove can hold. A faster speed spreads the signal over more groove length, and a larger diameter gives the groove more length overall. These are general principles, and the sound you get depends on the mastering and the pressing.

For playing, the key point is to match the speed to the label. If the record sounds too slow and deep, you are probably playing a 45 RPM record at 33. If it sounds too fast and high pitched, the opposite is happening. Our size and speed chart gives a quick check.

Open the record size and speed chart →

Setting up your turntable for each format

Choose the speed with the switch or button on your turntable before lowering the stylus. If you play a seven inch single, use the small adapter if the hole is large, and check that the tonearm rest or auto start function is set for the right record size. Some automatic turntables detect size and others need you to set it.

If your turntable is fully manual, place the stylus at the outer edge of the record yourself. Make sure the record sits flat and the platter is clear of dust. Take your time lowering the arm, since a seven inch record has less space before the first groove than a 12 inch one.

Read about turntable speeds →

Which format suits which listening

LPs are best for listening to whole albums in one sitting. EPs are a good way to hear a short release without flipping the record many times. Singles are handy for parties, jukebox style playlists and collecting a favorite song with a b side that is not on the album.

From a collecting view, singles are small and easy to store, but they can be fragile and are easily lost in a crate. Store seven inch records in their own sleeves and crates, and keep 12 inch records upright on a shelf with good support to avoid warping.

See record storage crate picks →

Other sizes you may run into

Ten inch records exist too. They were used for older releases and some modern special editions, and they are less common in shops. They usually play at 33 or 45 RPM depending on the release, so check the label. Most turntables handle them, though automatic models may not detect that size on their own.

Very old 78 RPM discs come in ten inch and twelve inch sizes and need a turntable with a 78 speed setting and a suitable stylus. Do not play them at 33 or 45, since the groove is wider and the music will not sound right. If you are unsure, check the label and the manual for your turntable before playing.

Buying tips for beginners

If you are new to vinyl, a standard LP is the easiest place to start because every turntable supports it. If you want to buy singles or EPs, check that your turntable offers a 45 RPM setting, and keep an adapter on hand. Many entry level players include both.

When you buy online, read the listing for size and speed, since the title alone does not always say. Look at the product details for the diameter and RPM, and check the pressing notes if you care about sound. If a listing is unclear, ask the seller before ordering.

Popular right now

  1. How to Ground a Turntable and Eliminate HumArticle
  2. How to Align a Phono Cartridge for Accurate TrackingArticle
  3. RIAA equalization explainedGlossary
  4. Setting Tracking ForceArticle
  5. Best Stylus Cleaners for Vinyl (2026)Buying guide
  6. How to Fix a Turntable Playing Through Only One ChannelArticle

Based on the last 28 days of search and visitor data.